Storing And Recalling Dynamic Label; Setting The Announcement Support Interruption; Switching The Service Follow; Switching Primary Or Secondary Service Component - Pioneer DEH-P77MP Operation Manual

DAB tuner
3 Press ROTARY ENCODER to scroll.
Press ROTARY ENCODER repeatedly to scroll
the dynamic label data.
Storing and recalling dynamic
label
You can store data from up to six dynamic
label transmissions at buttons 16.
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on the pre-
vious page.
2 Press any of 16 and hold to store the
selected dynamic label.
The memory number will display and the se-
lected dynamic label has been stored in mem-
ory.
The next time you press the same 16 button
in the dynamic label display the stored text is
recalled from memory.
Setting the announcement
support interruption
1 Press FUNCTION to select ANNOUNC.
Press FUNCTION until ANNOUNC appears in
the display.
2 Rotate ROTARY ENCODER to select the
desired announcement support.
Rotate ROTARY ENCODER until the desired
announcement support appears in the display.
! WEATHER  area weather flash
! ANNOUNC  announcement
3 Press ROTARY ENCODER to turn an-
nouncement support interruption on or
off.
All manuals and user guides at all-guides.com
Note
You can turn the news flash on or off by pressing
and holding TA.

Switching the service follow

1 Press FUNCTION to select SF.
Press FUNCTION until SF appears in the dis-
play.
2 Press ROTARY ENCODER to turn service
follow on or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
SF :ON (on)SF :OFF (off)
Switching primary or
secondary service component
1 Press FUNCTION to select service com-
ponent selection.
Press FUNCTION until service component ap-
pears in the display.
2 Rotate ROTARY ENCODER to select the
desired service component.
Rotate ROTARY ENCODER until the desired
setting appears in the display.

Available PTY function

Available PTY search lets you see the list of
available PTYs that is in the current ensemble
and select one of them to receive.
1 Press FUNCTION to select available PTY
selection (PTY).
Press FUNCTION until program type appears
in the display.
Section
09
35
En