Storing And Recalling Dynamic Label; Introduction Of Xm Operation - Pioneer DEH-P8400MP Operation Manual

Section
Other Functions
09
3 Press ∞ to scroll the dynamic label.
• When viewing dynamic label, do not operate
until you have parked your car safely.
• If you press 5, you return to the first line.
• If you select the dynamic label mode again
after having canceled it, the information may
switch to the latest available.

Storing and recalling dynamic label

You can store data from up to six dynamic label
transmissions at buttons
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on page 51.
2 Press any of 1–6 and hold to store the
selected dynamic label.
The memory number will display and the
selected dynamic label has been stored in mem-
ory.
The next time you press the same
the dynamic label display the stored text is
recalled from memory.
52 En
.
1–6
button in
1–6

Introduction of XM operation

1 2 3
You can use this product with a separately sold
Universal XM satellite digital tuner system (GEX-
FM903XM) or XM satellite digital tuner (GEX-
P900XM). For details concerning operation,
refer to the XM tuner's operation manuals. This
section provides information on XM operations
with this product which differs from that
described in the XM tuner's operation manual.
1
CHANNEL SELECT MODE
Shows what channel select mode has been
selected. is displayed when
CH.No
is selected, and
BER
is selected.
CATEGORY
2
CHANNEL NUMBER
Shows to which channel number the tuner is
tuned.
3 XM Tuner information
The display is switched each time
is pressed.
4
indicator
PRESET NUMBER
Shows what preset has been selected.
5
indicator
BAND
Shows the band which has been selected.
4 5
indicator
CH NUM-
is displayed when
CAT
indicator
DISPLAY