Repairs; Manufacturer's Declaration - Linak CBH Advanced User Manual

Repairs

In order to avoid the risk of malfunction, all HOMELINE
repairers, as special tools must be used and special gaskets must be fitted. Lifting units under warranty must also be returned
to authorised LINAK workshops.
Warning!
If any of the HOMELINE
Warning!
The HOMELINE
®
Herewith declares that LINAK HOMELINE® products as characterized by the following models and
types:
Control Boxes
Linear Actuators
Dual Actuators
Controls
Accessories
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:
1.5.1 Electricity supply
The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg,
Original Declaration
products are opened, there will be a risk of subsequent malfunction.
®
systems are not resistant to cutting oil.
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
CB7, CB9H, CBH Advanced, CBH Basic
And
LA27, LA27CS, LA28, LA29, LA31 HOMELINE
TD1, TD3
And
HB10, HB10RF, HB20, HB20RF, HB40, HB60, HC10, HC10RF, HC20RF,
And
DC CONNECTOR, DJBH, LED Lightbox, Lightplug001
SMPS001, SMPS002, SMPS006, TR6, USB Connector
2014-10-09
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
repairs must only be carried out by authorised LINAK
®
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
Page 9 of 32
workshops or
®
,
Massage Motor,