Troubleshoot The Module - Allen-Bradley 1786-RPFS Installation Instructions Manual

ATTENTION: Under certain conditions, viewing the optical port
may expose the eye to hazard. When viewed under some
conditions, the optical port may expose the eye beyond the
maximum permissible exposure recommendations

Troubleshoot the Module

Use the channel 1 or 2 status indicators to check module status and troubleshoot
the module.
Indicator
Off
Green
Flashing Green
ATTENTION: Class 1 laser product. Laser radiation is present when
the system is open and interlocks bypassed. Only trained and qualified
personnel should be allowed to install, replace, or service this
equipment.
ControlNet Modular Repeater Short-distance Fiber Module 11
Channel 2 Status
Probable Cause
Repeater not connected to the power supply.
Channel is operating normally.
No activity on the channel.
Rockwell Automation Publication 1786-IN012B-EN-P - November 2010
Channel 1 Status
30081