TEXA eTRUCK Technical Manual page 30

12. Reinsert the yellow fastener.
13. Fasten the two red and black cables together
with the existing wiring, following it up to the
yellow diagnostic socket.
14. On the Volvo Truck proprietary socket (yellow
connector), locate pins 2 (grey cable) and 3
(orange cable).
15. Using the supplied cable joints, connect the
black wire to the grey wire and the red wire to the
orange wire of the yellow diagnostic socket.
WARNING: to be able to use the cable joint,
you need to cut the grey and orange wires.
Cable matching:
• Black + grey
• Red + orange
16. Install the yellow diagnostic socket back onto
its bracket.
30
G. Cable joint with black and
grey wires
H. Cable joint with red and
orange wires