Table of Contents
Advertisement
12 eTRUCK INSTALLATION KIT FOR VOLVO EURO IV-V
(ACCESSORY)
The industrial vehicles of the Swedish manufacturer Volvo Truck, with approval
class Euro IV and Euro V, were created in different configurations, many of
which have two diagnostic sockets.
One is the EOBD connection, the other is the Volvo Truck proprietary diagnostic
socket (Texa ref.: connection cable 3151 / T11B).
In order to use the eTRUCK device to its fullest potential, the electrical wiring
needs to be modified in this series of vehicles.
This is because the installed EOBD diagnostic socket does not allow analysing
all the values, but only the parameters of the EOBD standard protocol.
The modification does not require special technical skills, and the installation
kit contains the material and information that are needed to carry out the
modification.
However, the work should be performed by technical personnel with all the
necessary knowledge to perform it properly.
Following is a step-by-step description of the procedure operations,
accompanied by explanatory images.
NOTES:
This technical information sheet is ONLY for the vehicles with the two diagnostic
sockets.
The vehicles with only the EOBD socket are already 100% compatible with the
eTRUCK device.
26
Advertisement
Table of Contents
