Summary of Contents for TEXA eTRUCK
- Page 1 TEXA eTRUCK MANUALE TECNICO TECHNICAL MANUAL MANUEL TECHNIQUE TECHNISCHE BEDIENUNGSANLEITUNG MANUAL TECNICO MANUAL TECNICO INSTRUKCJA OBSŁUGI TECHNICZNEJ ТЕХНИЧЕСКОЕ РУКОВОДСТВО Rev.01...
-
Page 3: Table Of Contents
3.2.6 Fire and Explosion Hazard...............11 3.2.7 Noise Hazard....................11 3.2.8 High Voltage Hazard.................11 3.2.9 Poisoning Hazard..................12 3.3 General User and Maintenance Warnings...........12 4 SPECIFIC USER SAFETY RULES FOR TEXA eTRUCK....13 4.1 General Rules..................13 4.2 User Safety...................13 4.3 Vehicle Safety..................13 4.4 Device Safety..................14 5 ENVIRONMENTAL INFORMATION..........16... - Page 4 11.2 Configuration through the App............23 11.3 Installation in the Vehicle..............24 11.3.1 Installation through 9-pin Deutsch Adapter..........24 12 eTRUCK INSTALLATION KIT FOR VOLVO EURO IV-V (ACCESSORY)..................26 13 USE....................32 14 POWER SUPPLY ................32 15 BLINK CODES................33 16 MAINTENANCE................34 17 TROUBLESHOOTING..............35 18 LEGAL NOTICES................36...
-
Page 5: Revision Of The Manual
TEXA TRUCK TECHNICAL MANUAL REVISION OF THE MANUAL This document is revision 01 of the TEXA eTRUCK technical manual. Issue date: 11/10/2017... -
Page 6: Introduction
INTRODUCTION Dear Customer, We would like to thank you for choosing a TEXA product for your workshop. We are certain that you will get the greatest satisfaction from it and receive a great deal of help in your work. Please read through the instructions in this manual carefully and keep it for future reference. -
Page 7: Legend Of The Symbols Used
1 LEGEND OF THE SYMBOLS USED The symbols used in the manual are described in this chapter. Asphyxiation Risk Explosion Risk High Voltage Hazard Fire / Burn risk Poisoning Hazard Corrosive Substances Risk Noise Hazard Moving Parts Risk Crushing Risk General Risk Important information... -
Page 8: Glossary
Contract in order to use the services associated with TEXA eTRUCK. • DRIVER: the driver of a vehicle of the fleet. • Fleet: the group of vehicles managed by the FLEET MANAGER, where TEXA eTRUCK is installed. • TEXA eTRUCK FLEET MANAGER WEB Portal: the WEB portal owned by TEXA through which the FLEET MANAGER can view the data related to the vehicles of her/his fleet. -
Page 9: General Safety Regulations
3 GENERAL SAFETY REGULATIONS 3.1 Glossary • Operator: qualified individual, in charge of using the device / tool. • Equipment / device / tool: the purchased product. • Workplace: the place where the operator must carry out her/his work. 3.2 Operator Safety Regulations 3.2.1 General Safety Regulations •... -
Page 10: Hazards Caused By Moving Parts
Safety Precautions: • Always make sure that the vehicle is in neutral gear (or that it is set in parking position in case of a vehicle equipped with automatic transmission). • Always activate the hand brake or parking brake on the vehicle. •... -
Page 11: Fire And Explosion Hazard
3.2.6 Fire and Explosion Hazard The following are potential fires and / or explosion hazards: • The types of fuel used by the vehicle and the vapours released by these fuels. • The refrigerants used by the A/C system. • The acid in the vehicle batteries. Safety Precautions: •... -
Page 12: Poisoning Hazard
• Operate in conditions of insulation from ground. • Work with dry hands only. • Keep conductive liquids away from the engine while working. • Never leave tools on the battery in order to avoid accidental contacts. 3.2.9 Poisoning Hazard The hoses used to extract the gases can release toxic gases, dangerous to the operator if exposed to temperatures higher than 250 °C or in case of a fire. -
Page 13: Specific User Safety Rules For Texa Etruck
Users of TEXA eTRUCK are required to follow the general safety rules, to use the device for its intended use only and to take care of it as indicated in this manual. -
Page 14: Device Safety
Safety Measures: • Delicately remove any plastic part, cover or bulkhead that might cover the diagnostic socket, being careful not to loose any screw or fastening hook. • Be careful not to damage or disconnect any plastic part or cable near the diagnostic cable. - Page 15 Safety measures: • Do not wet the device with water or other liquids. • Use the device on vehicles with a 12-24 V DC power supply, chassis connected to the negative pole, and in any case only on supported vehicles. •...
-
Page 16: Environmental Information
5 ENVIRONMENTAL INFORMATION For information regarding the disposal of this product please see the pamphlet supplied. -
Page 17: Operation Of The Radio Devices
6 OPERATION OF THE RADIO DEVICES Wireless connection with Bluetooth® technology The wireless connection with Bluetooth technology is a technology that supplies a standard and reliable method to exchange information between different devices, using radio waves. Products such as cellular phones, portable devices, computers, printers, cameras, pocket PCs etc. -
Page 18: Regulatory Information
7 REGULATORY INFORMATION Simplified EU Declaration of Conformity The manufacturer, TEXA S.p.A, declares that the type of radio equipment TEXA eTRUCK is compliant with the RED 2014/53/EU directive. The complete text of the EU declaration of conformity is available at... -
Page 19: Texa Etruck
8 TEXA eTRUCK TEXA eTRUCK is a compact device that allows the workshop to constantly monitor the vehicle status remotely, managing its maintenance from a predictive point of view and carrying out adjustment functions that allow restoring the optimal vehicle conditions. -
Page 20: Description
9 DESCRIPTION 1. LED • Red / green LED • Blue LED 2. OBD connector 3. Retention hook (*) For further information see the Blink Codes chapter. -
Page 21: Technical Features
10 TECHNICAL FEATURES Manufacturer TEXA S.p.A. Model TEXA eTRUCK Processor ARM Cortex M4 (STM32F439ZIY6) • SDRAM: 8 MB Memory • Flash NAND: 4 GB • Bluetooth Classic (2.1) Communication • Bluetooth 4.0 Low Energy (Smart Ready) Diagnostic connector OBD socket ISO15031-03 for 24 V systems •... - Page 22 Dimensions in [mm] Weight 15 g RED 2014 / 53 / EU Directives ROHS 2011 / 65 / EU EN 301 489-1 V2.1.1 EN 301 489-17 3.1.1 EN 300 328 V2.1.1 Product standards EN 62311:2008 EN 60950-1:2006 / A11+A1+A12+AC:2001+A2:2013 ISO 7637-1:2002 ISO 7637-2:2011 Regulations UN / ECE R10...
-
Page 23: Installation And Configuration
Do not move the device onto any other vehicle without performing the installation and configuration procedure. 11.1 Preliminary operations • Sign up on the eTRUCK WORKSHOP Web Portal • Get the FLEET MANAGER email address • Download the WORKSHOP app from Google Play Store or Apple App Store •... -
Page 24: Installation In The Vehicle
Do not start driving before the plastic parts and panels removed are repositioned correctly. 11.3.1 Installation through 9-pin Deutsch Adapter The device can also be installed on vehicles with a 9-pin Deutsch socket through the specific adapter supplied by TEXA S.p.A. (code: 3907794). - Page 25 For this installation mode, all the warnings in the previous section apply. Proceed as follows: 1. Turn off the vehicle (instrument panel off). 2. Locate the diagnostic socket. 3. Carefully remove any panel covering the diagnostic socket. 4. Connect the device to the adapter. 5.
-
Page 26: Etruck Installation Kit For Volvo Euro Iv-V (Accessory)
One is the EOBD connection, the other is the Volvo Truck proprietary diagnostic socket (Texa ref.: connection cable 3151 / T11B). In order to use the eTRUCK device to its fullest potential, the electrical wiring needs to be modified in this series of vehicles. - Page 27 The installation kit includes: A. Cable joints B. Cable terminals C. Electrical cables To install the kit properly and access all TEXA eTRUCK functions, carefully follow the instructions below. 1. Make sure the parking brake is engaged. 2. Disconnect the batteries.
- Page 28 (black wire of the original wiring) is powered by a direct battery positive (+30) and not a key-on (+15). If necessary, restore the EOBD socket wiring. Otherwise, full functionality of TEXA eTRUCK is not guaranteed. D. EOBD socket E. Volvo Truck proprietary...
- Page 29 8. On the EOBD socket (light blue connector), locate pins 12 and 13 (with no cables installed). 9. Remove the yellow fastener from the EOBD socket. 10. Using the supplied red/black cables and terminals, crimp the terminals on the wires. B.
- Page 30 12. Reinsert the yellow fastener. 13. Fasten the two red and black cables together with the existing wiring, following it up to the yellow diagnostic socket. 14. On the Volvo Truck proprietary socket (yellow connector), locate pins 2 (grey cable) and 3 (orange cable).
- Page 31 17. Install the EOBD socket back onto its bracket. 21. Reconnect the batteries 22. TEXA eTRUCK can now be installed in the EOBD socket and used at its fullest potential.
-
Page 32: Use
For further help, contact your Retailer or send a request for assistance through the function TEXA iSupport - eTRUCK. 14 POWER SUPPLY The device draws its power supply directly from the battery of the vehicle it is connected to through the diagnostic socket. -
Page 33: Blink Codes
15 BLINK CODES Starting TEXA eTRUCK by plugging it in (inserting TEXA eTRUCK in the vehicle's diagnostic socket) and with the vehicle stationary. Meaning GREEN - BLUE: quick Device connected to the vehicle, available for alternate blink pairing. - Device connected via Bluetooth:... -
Page 34: Maintenance
Every time TEXA eTRUCK is started: Meaning GREEN: 2 blinks User application successfully started. RED: 4 blinks Error in starting the user application. 16 MAINTENANCE This product does not require special maintenance. For a longer tool life, keep the product clean and follow the instructions detailed in this manual carefully. -
Page 35: Troubleshooting
If the error persists, contact your There is an error condition. Retailer or send a request for assistance through the function TEXA iSupport - eTRUCK. Problem The smartphone does not communicate with the device. Possible Cause Possible Solution The vehicle's instrument panel Turn on the vehicle's instrument is off. -
Page 36: Legal Notices
18 LEGAL NOTICES TEXA S.p.A. Via 1 Maggio, 9 - 31050 Monastier di Treviso - ITALY Tax Code - Company Register of Treviso ID No. - VAT No.: 02413550266 Single-shareholder company subject to the direction and coordination activities of Opera Holding S.r.l.