Device Safety - TEXA eTRUCK Technical Manual

Safety Measures:
• Delicately remove any plastic part, cover or bulkhead that might cover the
diagnostic socket, being careful not to loose any screw or fastening hook.
• Be careful not to damage or disconnect any plastic part or cable near the
diagnostic cable.
• Carefully reposition and close any plastic part, cover or bulkhead once the
device's installation and configuration phase is completed.
• Do not install the device on vehicles that are not supported.

4.4 Device Safety

The device was designed to be used in specific environmental
conditions.
Using the device in environments with temperatures and humidity that
differ from those specified may impair its efficiency.
Safety measures:
• Always place the device in a dry area.
• Do not expose or use the device close to heat sources.
• Position the device in order to guarantee its proper ventilation.
• Do not use corrosive chemicals, solvents or harsh detergents to clean the device.
The device was created to be mechanically resistant and suitable for
the use it was designed for.
Careless use and excessive mechanical strain may impair its
efficiency.
Safety measures:
• Do not drop, shake or knock the device.
• Do not carry out any type of intervention that may damage the device.
• Do not open or disassemble the device.
• Do not force the device or the connectors and take the utmost care during all
connecting and disconnecting operations.
• Connect the device properly and securely in order to avoid it from accidentally
disconnecting during use.
• Do not use screwdrivers or other tools to lever and disconnect the device.
The device was manufactured to be electrically safe and to work with
specific supply voltage levels.
Failure to comply with the specifications related to the power supply
may impair the device's efficiency.
14