TEXA eTRUCK Technical Manual page 29

8. On the EOBD socket (light blue connector),
locate pins 12 and 13 (with no cables installed).
9. Remove the yellow fastener from the EOBD
socket.
10. Using the supplied red/black cables and
terminals, crimp the terminals on the wires.
11. Insert the black cable into pin 12 and the red
cable into pin 13 of the EOBD socket.
Cable colour: black - Pin: 12
Cable colour: red - Pin: 13
B. Cable terminals
C. Electrical cables
en
29