Product Setup - Vance and hines Fuelpak FP3 User Manual

INSTRUCTION
GET CONNECTED
1. Download/install the FP3 app through Apple App Store or Google Play Store
2. Plug the FP3 into the motorcycle's diagnostic port
3. Turn ignition to the "on" position
4. Turn the handlebar run switch to the "on" position
5. Open FP3 app and connect to FP3
Android: Enable Bluetooth
and pair to device through app
6. Verify strong internet connection before proceeding

PRODUCT SETUP

4
iOS: Pair to the device through
iOS Bluetooth settings (located
in Settings app)