EDITING MAPS
The FP3 allows access to all of the ECU's tables for adjustments, as well as map
optimization features to improve your riding experience.
NOTE: Vance & Hines does not recommend adjusting ECU tables if you are not
familiar with tuning. Engine damage can result from improper settings.
1. Go to 'View/Edit Maps'
2. Press the map you want to edit
3. Select the table you want to edit
4. Select a single cell to change, or change several cells at once by long pressing
a cell, then long pressing an adjacent cell to highlight all cells in between
5. You can manually type in a value, or use the calculator to add, subtract,
multiply, or divide to achieve your desired results.
Example: To increase cells by 10%, highlight appropriate cells and multiply (*) by 1.1.
6. Once desired changes have been made, press the flash button
(lightning bolt ) and follow the on screen prompts.
VIEW / EDIT MAPS
HIGHLIGHT TWO ADJACENT
CELLS TO CREATE A BLOCK OF
CELLS TO EDIT
7
INSTRUCTION
MORE INFORMATION ABOUT TABLE
FLASH MAP
RESET TABLE TO ORIGINAL SETTINGS
CHANGE TABLE CATEGORY
USE FUNCTIONS TO EDIT CELLS.
HERE, 10% IS BEING ADDED
TO CELL AREA BY MULTIPLYING
BY 1.1