Table of Contents
Advertisement
INSTRUCTION
ENGINE MODIFICATIONS
Additional tables for engine modifi cations can
be found in the 'Map Optimizations' section. Rev
limit, engine displacement, injector size, and other
parameters can be altered here. Be sure to press
the fl ash button (lightening bolt) after making new
changes to apply them to your map/bike.
SERVICE ODOMETER
This feature is available for CAN BUS (6-pin)
equipped motorcycles and allows the user to easily
keep track of miles/kilometers for maintenance such
as oil changes, tires, break-ins, etc.
1. Go to 'Maintenance'
2. Select 'Service Odometer'
3. Select an available counter
4. Type in a name for the counter, i.e. "Oil Change"
5. Press check mark to begin counter
6. When ready, press 'Reset' to set the counter back to 0.0.
READ / CLEAR TROUBLE CODES
1. Go to 'Maintenance'
2. Press 'Read Trouble Codes'
3. To view a more detailed description of the
code, press the carrot logo next to the code
4. To clear trouble codes, press 'Clear Trouble
Codes' at the bottom of the screen
NOTE: The "U0100 Lost Communication with ECM"
is normal when using the FP3 and will not
trigger an engine light. There may be one or
several of these codes. If a code returns after
clearing, this indicates a continuing issue
with the bike that needs to be addressed
REFRESH TROUBLE CODES
PRESS TO SHOW MORE INFORMATION
ABOUT TROUBLE CODE
PRESS TO CLEAR TROUBLE CODES.
IF CODE(S) RETURN, THE ISSUE IS
STILL PRESENT
EDIT MAPS / MAINTENANCE
10
Hide quick links:
Advertisement
Table of Contents
