Table of Contents
Advertisement
TROUBLESHOOTING
CAN'T CONNECT TO BLUETOOTH
1.
Restart your phone
2.
Go to your phone's Bluetooth settings and "forget device" or "unpair" the FP3 (will
show as last 6 of your VIN)
3.
Turn key and handlebar run switch both on
4.
Wait for your VIN to re-appear as available Bluetooth device
5.
Once connected, open the FP3 app.
ERROR MESSAGE WHEN FLASHING
1.
Verify that your FP3 app is up to date through the app store on your phone.
2.
Turn bike on and connect to the FP3 app
3.
Go to Customer Support and press 'Check for Firmware Update' to verify your
fi rmware is up to date.
•
If fi rmware is available, install
•
Once install is complete, try to fl ash the bike
4.
If fi rmware is up to date already, or error message continues, go to Customer Support
and press 'Upload ECU Content'
5.
Once ECU Content is Uploaded, try to fl ash again
6.
If error continues, contact Vance & Hines
SUPPORT
15
INFORMATION
Hide quick links:
Advertisement
Table of Contents
