FANATEC CSL Elite Wheel Base Manual page 37

Straights are for fast cars. turns are for fast drivers

Hide thumbs Also See for CSL Elite Wheel Base:

Table of Contents

acknowledge each single position by pressing START (10) / MENU

to the next one.

The following pictures show the instructions on the LED display of the Universal

Hub but are similar on the other Fanatec Steering Wheels:

If your shifter has no 7th gear just acknowledge it by pressing START (10)

when the shifter lever is physically in position of 6th gear. After all gears are

calibrated the LED display shows S_1 and the shifter is ready for use.

NOTE:

please simply complete the calibration process without connected shift-

er and moving shifter lever, then leave the shifter calibration mode at the

end of the process. This has no impact on the CSL Elite Wheel Base orig-

inal calibration itself and you can go ahead without shifter.

. . . . . . . . . . . . . . . . neutral position

. . . . . . . . . . . . . . . . . . . . . . . . . . rear

. . . . . . . . . . . . . . . . . . . . . . . 1

. . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . 4

. . . . . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . . . . 6

. . . . . . . . . . . . . . . . . . . . . . . 7

If you did not intend entering the shifter calibration mode

gear

to get

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the CSL Elite Wheel Base and is the answer not in the manual?