Table of Contents
Advertisement
6.5 Cooling system
To avoid damages to the CSL Elite Wheel Base
there is a well-managed cooling system integrated
to the hardware and the firmware.
6.5.1 Hardware measures
The CSL Elite Wheel Base has a fan inside which carries out the hot air from
the inside of the CSL Elite Wheel Base:
Make sure that there is nothing blocking the air intake at the CSL Elite Wheel
Base back side.
6.5.2 Automatic fans adjustment
The firmware provides different stages of fan control which are clearly defined
after intensive testing on the R&D lab.
When switching ON the CSL Elite Wheel Base the fan operates at maximum
speed until calibration run is completed.
The operation speed of the fan is adjusted according to the currently detected
temperature of the motor inside the CSL Elite Wheel Base and could even stop,
depending on used firmware version.
The temperature control is subject to change by firmware updates so that the
fans behaviour also could be changed.
33
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CSL Elite Wheel Base and is the answer not in the manual?
Questions and answers