FANATEC CSL Elite Wheel Base Manual page 26

When the Wheel Base Updater is
connected to the CSL Elite Wheel
Base the buttons 'Load Hex File' and
'Flash Firmware' are available as
shown on the right hand side:
Use button 'Load Hex File' to browse
and select the wanted firmware file
(.hex). Usually the latest available
firmware found is already pre-select-
ed and this step can be skipped.
When the pre-selected firmware file
(.hex) is ok or the wanted firmware
file (.hex) is chosen press button
'Flash Firmware' to execute the firm-
ware update.
The firmware update is proceeding.
You can see the progress bar becom-
ing green as shown on the right hand
side:
26