GDC SR-1000 User Manual page 66

7. CONFIGURATION
5
6
7
8
[Network Configuration]
5
Subnet Mask
IMB Ethernet 2
IMB Ethernet 1
Validate IP's
User Manual for SR-1000 Standalone Integrated Media Block™
Figure 51: System Configuration (2)
Specify the subnet mask..
Gateway Specify the network gateway for the SR-1000.
This is the main IP address of the SR-1000. The Web-UI interface can
be reached at this IP address.
Enable this to set up a secondary network on the SR-1000. This is
usually connected to a content management network. When it is
checked, IP address, Subnet Mask, Server Content IP can be set.
After setting the above network configurations, click Validate IP's to
check the correctness of the IPs entered. A pop-up opens displaying
the result.
- 65 -
March 23, 2018