Schedule - GDC SR-1000 User Manual

5. AUTOMATION
1 [Quick Mode Label]
2
[Send Automation Cue]
3 [Projector Quick Setup]

5.2 Schedule

This tab is used to schedule automation cues to execute at the specified date and time.
1
User Manual for SR-1000 Standalone Integrated Media Block™
An automation label can be configured to be easily triggered here.
This label can be set in Automation à Option tab.
(Refer to Section 5.6)
Click the Execute button to execute the automation cue.
This section is used to manually execute a configured automation
label.
Select a label and click the Execute button to execute the
automation label manually.
This section is used to manually send an automation command
to a configured projector.
Select the projector primitive or macro to be executed and click
the Execute button to send the command to the projector.
Figure 12: Scheduling Cues
- 22 -
2
March 23, 2018