Sensor - GDC SR-1000 User Manual

7. CONFIGURATION
5
[Mount Capacity Threshold
(for data in %)]
[Send detailed S.M.A.R.T.
6
1
1 [CPU Temperature
Threshold]
User Manual for SR-1000 Standalone Integrated Media Block™
Set the mount capacity threshold value for data (in percentage)
NOTE: When Trap is On, a trap will be sent if the mount
capacity threshold value is reached.
Enables the sending of SNMP traps when specific hard disk
S.M.A.R.T. attributes change
traps]

7.1.1.6 Sensor

Figure 32:SNMP Configuration - Sensor
Set the threshold temperature required for the CPU sensors by
typing in the field or using an on-screen keyboard.
Check CPU Temperature Threshold to activate the Trap.
NOTE: When Trap is On, a trap is sent if the CPU temperature
exceeds the maximum threshold temperature.
- 45 -
March 23, 2018