Selects the language used by the OSD.
OSD TURN OFF
The OSD menu will stay on as long as it is in use. You can select how long the monitor waits after the last key touch to
shut off the OSD menu. The preset choices are 10-120 seconds by 5-second increments.
OSD LOCK OUT
This control completely locks out the access to all OSD control functions except for VOLUME, BRIGHTNESS and
To activate the OSD LOCK OUT function, enter the OSD TOOL sub menu, select "OSD LOCK OUT", touch and hold
the "INPUT/RESET" key and "+" simultaneously until "OSD LOCKED OUT" indicator appears.
To deactivate, touch the SELECT key, then repeat the same steps until the OSD main menu displays on screen.
If you select "ON", the monitor displays "VIDEO INPUT MENU" after changing the input.
If you select "OFF", the monitor doesn't display "VIDEO INPUT MENU" after changing the input.
OSD Warning menus disappear by touching the SELECT key.
NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a
change of input signal or video is inactive, the NO SIGNAL window will appear.
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power
is turned on or there is a change of input signal or the video signal doesn't have proper timing, the OUT OF RANGE
menu will appear.