Sharp AH-AP18DR Service Manual page 43

3. Remove the connector of Louver motor and take
off the Wire and Holder.
4. Push the one of the Vertical louver.
How to remove the DISPLY COVER.
1 Push the center of the Front panel under
the Display cover.
2 Slide it to one side.
2
1
How to remove the Hi Voltage UNIT.
1. Remove 2 screws fixing Holder.
2. Take off the HIGH VOLTAGE UNIT ASS'Y from
the HOLDER
3. Remove the connector of HIGH VOLTAGE UNIT
ASS'Y
43
AH/AY-AP18DR
AH/AY-AP24DR