Models*
QT50R
QT50RQ
QT50RUS
QT50RUSQ
* For 9 m cable, add suffix "W/30" to the model number of the cabled sensor (e.g., QT50R W/30). A QD model requires a mating cable. See page 7.
WARNING . . .
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Printed in USA
R-GAGE™ QT50R Series Sensor
Radar-Based Vehicle Detection Sensor
• Reliably detects vehicles and trains based on frequency-modulated continuous-wave
(FMCW) radar technology
• Detects objects up to 7.2 m (24') away using a fixed background reference target up
to 8 m (26') away
• Detection is unaffected by wind or changing air temperatures
• Easy to set up using sealed push button or remote wire
• Operates in Industrial, Scientific, and Medical (ISM) telecommunication band; no
special license required
• 15 to 30V dc operation
• Rugged IP67 housing for harsh environments
Sensing Range
5-wire, 2 m (6.5') cable
Objects:
5-pin Euro-style integral QD
0.5 to 7.2 m (1.6' to 24')
Background:
5-wire, 2 m (6.5') cable
4 to 8 m (13' to 26')
5-pin Euro-style integral QD
Not To Be Used for Personnel Protection
Features
Models
Cable
Telecom Approval
ETSI/EN 300 440
(EU except
UK and France)
FCC Part 15
08/06
Output
Bipolar NPN and PNP
(USA)
P/N 124617 rev. C