Interfaces Dataplane <Interface> Vif <Vif-Id> Bridge-Group - Brocade Communications Systems 5600 Configuration Manual

interfaces dataplane <interface> vif <vif-id> bridge-group
Adds a data plane vif to a bridge group.
Syntax
set interfaces dataplane
cost | point-to-point status | priority priority | restrict-tcn | root-block]
delete interfaces dataplane
cost | priority | restrict-tcn | root-block]
show interfaces dataplane
Parameters
interface
The name of a data plane interface. For more information about the supported name formats of a data plane interface,
refer to Supported Interface Types
vif-id
A virtual interface ID. The ID ranges from 1 through 4094.
admin-edge
Enables the Spanning Tree admin edge mode.
auto-edge
Enables Spanning Tree automatic admin edge detection.
bpdu-guard
Enables Spanning Tree Protocol PortFast Bridge Protocol Data Unit (BPDU) guard.
brx
bridge
The bridge group ID.
cost
The path cost for the interface within its bridge group. The Spanning Tree Protocol (STP) uses this value to calculate
the shortest path from this bridge group to the spanning tree root. The range is 1 to 200000000. The default is 19.
network-port
Enables Spanning Tree uni-directional link detection.
status
point-to-point
Sets the point-to-point operational status to one of the following values:
∙
auto: Determines the point-to-point operational status from the duplex setting.
∙
off: Disable the point-to-point operational status.
∙
on: Enable the point-to-point operational status.
priority
The path priority for the interface within its bridge group. The range is 0 to 15. The default is 8.
restrict-tcn
Restricts propagation of topology change notifications for Spanning Tree.
root-block
Restricts the ability of ports to assume the Spanning Tree root role.
Brocade 5600 vRouter Bridging Configuration Guide
53-1004250-01
interface vif vif-id bridge-group admin-edge | auto-edge | bpdu-guard | bridge brx | network-port | cost
interface vif vif-id bridge-group [ admin-edge | auto-edge | bpdu-guard | bridge | network-port |
interface vif vif-id bridge-group
on page 67.
Bridge Interface Commands
63