Interfaces Bridge <Brx> Spanning-Tree Priority <Priority - Brocade Communications Systems 5600 Configuration Manual

interfaces bridge <brx> spanning-tree priority <priority>
Specifies the forwarding priority of a bridge group in the spanning tree.
Syntax
set interfaces bridge
delete interfaces bridge
show interfaces bridge
Command Default
The priority value is 8.
Parameters
brx
Bridge group ID.
spanning-tree
Specifies spanning tree configuration.
priority
Specifies the forwarding priority of this bridge group in the spanning tree. The lower the number, the higher the priority.
The range is from 0 through 15. The default value is 8.
Modes
Configuration mode
Configuration Statement
interfaces {
bridge brx {
spanning-tree {
priority priority
}
}
}
Usage Guidelines
Use this command to specify the forwarding priority of this bridge in the spanning tree.
The spanning tree protocol uses the bridge priority to determine the spanning tree root. The lower the number assigned to the
bridge group, the higher its priority, and the more likely it is to be selected as the root of the spanning tree.
Use the set form of this command to specify the forwarding priority of this bridge in the spanning tree.
Use the delete form of this command to restore the default priority configuration.
Use the show form of this command to view the priority configuration.
44
brx spanning-tree priority priority
brx spanning-tree priority
brx spanning-tree priority
Bridge Group Commands
Brocade 5600 vRouter Bridging Configuration Guide
53-1004250-01