Operation - D.T.Systems 1125DT Instruction Manual

Turning the 1125DT ON & OFF:
Turning the Unit ON:

Touch either magnet to the White Dot on the side of the
1125DT collar box for approximately one half second
until the number 0 flashes briefly on the LED Display.

The number 0 will be followed immediately by another
number (0-8) which will flash for approximately
1.5 seconds. This indicates on which intensity level the
unit is currently set.

The small sub LED light on the display will blink steadily
every 2.5 seconds to let you know the unit is ON and
functioning properly.
Turning the Unit OFF:

Touch either magnet to the white dot for 2 seconds. The
number 0 will quickly blink twice on the display. This
indicates the unit is now off.
While the unit is on quickly touch either magnet to the White
Dot (less than one second). Each time a magnet touches the
White Dot the stimulation level will increase by one level.
The level will flash in the display for 1/2 second. When the
level reaches 8 the next touch will reset the unit back to 0.
OPERATING THE 1125DT
Changing the Stimulation Level
8