Battery Replacement; Maintenance; Specifications - Extech Instruments MO265 User Manual

Battery Replacement

If the instrument does not switch ON or displays the low battery symbol, replace the battery
as follows:
1. Slide off the rear battery compartment cover
2. Replace the 9V battery
3. Secure the battery compartment
4.
You, as the end user, are legally bound (EU Battery ordinance) to return all used
batteries, disposal in the household garbage is prohibited! You can hand over
your used batteries / accumulators at collection points in your community or
wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the
device at the end of its lifecycle

Maintenance

•
Always keep the instrument dry
•
To clean, wipe the meter with a damp cloth. Use a mild detergent if necessary but
never use abrasives or solvents.
•
Prevent dirt from accumulating at the electrode pins

Specifications

Display
Resolution
Accuracy
Measurement principle
Range
Electrode pin length
Electrode pin type
Power supply
Low Battery Indication
Meter housing
Operating Temperature
Operating Humidity
Dimensions
Weight
Copyright © 2010 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form.
Backlit LCD digital display and tri-color LED bargraph scale
0.1%
Pin mode: ± (5% rdg + 5 digits)
Pinless mode is a relative reading only
Electrical resistance (pins)
Electromagnetic sensor (pinless)
0.0 to 99.9 %Relative (pinless)
6.0 to 94.8 %WME (pins)
11mm (0.44")
Integrated, replaceable
9V alkaline battery
Battery symbol displayed on LCD
Impact-proof plastic
o o
0 to 50 C (32 to 122 F)
80% Relative Humidity maximum
203 x 58 x 43mm (8 x 2.3 x 1.7"); not including remote probe
204g. (7.2 oz); not including remote probe
8 MO265-EU-EN-V1.0-10/10