Page 1
RTI-E3, RTI - EP2 Deutsch Bausatz Entladeregler für Wärmespeicher Gebrauchs- und Montageanweisung English Discharge Control Module for Storage Heaters Operating and Installation Instructions Français Kit de montage régulateur de décharge pour radiateurs à accumulation Notice d'utilisation et de montage Nederlands...
S2 switch on the control switched on by the RTI-E3, operated at a cons- panel of the storage heater (ON = " "). ON/OFF switch - tant speed, and then switched off again.
Page 4
⇒ Push the temperature selector button (R2) discharge control unit along behind the Designation Laying into the operating panel and turn it as far angle plate and upwards, insert it form from as the left-hand stop. above into the plug-in locations „TA“ to „N“ Lead (black) L (X1) S2 (top plug-...
The connection leads from the operating panel ches on. If the blower does not switch on, the hip, they are to be handed over to the new to the discharge control unit is to be laid and operating and fault displays on the charge and owner.
Need help?
Do you have a question about the RTI-E3 and is the answer not in the manual?
Questions and answers