Table of Contents
Advertisement
Troubleshooting Guide
The image is out of focus or blurred.
●
Set the lens's focus mode switch to <
●
Press the shutter button gently to prevent camera shake (p.56).
●
With a lens equipped with an Image Stabilizer, set the IS switch to
< 1 >.
●
In low light, the shutter speed may become slow. Use a faster
shutter speed (p.134), set a higher ISO speed (p.83), use flash
(p.177), or use a tripod.
●
See "Minimizing Blurred Photos" on page 124.
I cannot lock the focus and recompose the shot.
●
Set the AF operation to One-Shot AF. Shooting with the focus
locked is not possible with Servo AF (p.126, 262).
The continuous shooting speed is slow.
●
The continuous shooting speed for high-speed continuous shooting
may be lower, depending on conditions such as these: battery
level, temperature, flicker reduction, Dual Pixel RAW shooting,
Silent LV shooting, shutter speed, aperture, subject conditions,
brightness, AF operation, type of lens, use of flash, and shooting
settings (p.144).
592
AF
> (p.50, 53).
Advertisement
Table of Contents
