Table of Contents
Advertisement
Silent Live View Shooting N
You can adjust the camera's drive and shutter operating characteristics
to suit shooting conditions or the lens used.
Mode 1
z
Enables quieter shooting than with [Disable]. Continuous shooting is
also possible.
Mode 2
z
When the shutter button is pressed completely, only one shot will
be taken. While you keep holding down the shutter button, the
camera operation will be suspended. This enables quieter shooting,
and operation will resume once you return the shutter button to the
halfway position. Even if continuous shooting is set, only a single
shot will be taken.
Disable
z
Be sure to set it to [Disable] if you use a TS-E lens for shifting or
tilting the lens or if you use an extension tube. If [Mode 1] or [Mode
2] is set, the standard exposure may not be obtained, or an irregular
exposure may result.
Defocused image areas may be incomplete when shooting near
o
maximum aperture at high shutter speeds. If you dislike the appearance
of defocused image areas, shooting as follows may give better results.
• Shoot with [ z 6: Silent LV shoot.] set to [Disable].
• Shoot using Silent shutter.
• Lower the shutter speed.
• Increase the aperture value.
If [Mode 2] is set and you use a wireless remote control (sold separately,
o
p.174), the operation will be the same as with [Mode 1].
150
1
Select [ z 6: Silent LV shoot.].
2
Set an option.
Select an option, then press < 0 >.
z
Advertisement
Table of Contents
