Brother mfc-j947dw Reference Manual page 26

Error Message
Paper Tray #1 not
detected
Paper Tray #2 not
detected
Paper Tray #3 not
detected
Repetitive No
Paper Fed
Repetitive Paper
Jams
Replace Ink
Sending Error
Wrong Document
Size Settings
Touchscreen
Initialisation
Failed
Tray #1 Settings
Tray #2 Settings
Tray #3 Settings
MP Tray Settings
Action
Slowly push the paper tray completely into the machine.
Paper or a foreign object has prevented the paper tray from being
inserted correctly.
Pull the paper tray out of the machine, and remove the jammed paper
or foreign object. If you cannot find or remove the jammed paper, see
the Online User's Guide: Printer Jam or Paper Jam.
Clean the paper pick-up rollers.
For more detailed information, see the Online User's Guide: Clean the
Paper Pick-up Rollers.
Remove any foreign objects and paper scraps in the machine.
For more detailed information, see the Online User's Guide: Remove
Paper Scraps.
One or more of the ink cartridges have reached the end of their lives.
Replace the ink cartridges.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
• You can still scan even if the ink is low or needs to be
replaced.
Select the correct document size option, and then press Fax Start
again.
The touchscreen was pressed before the power on initialisation was
completed.
Make sure nothing is touching or resting on the touchscreen,
especially when plugging the machine in.
Debris may be stuck between the lower part of the touchscreen and its
frame.
Insert a piece of stiff paper between the lower part of the touchscreen
and its frame and slide it back and forth to push out the debris.
This message is displayed when the setting to confirm the paper type
and size is enabled.
To not display this confirmation message, change the setting to Off.
For more detailed information, see the Online User's Guide: Change
the Check Paper Size Setting.
25