Ports And Buttons - Xplornet Hub 2.0 User Manual

Ports and Buttons

Power plug, on/off switch and ports are located on the back and side of the
Xplornet Hub.
Back
Ports
Phone1~Phone2
LAN1~LAN4
WAN
WPS
Reset
WLAN
Power
Side
Buttons
USB
On/Off
RJ-11 port is used to connect to the phone through the telephone line
RJ-45 port is used to connect the modem to computer or other network
devices
RJ-45 port is used to connect to your Xplornet modem
WLAN Protected Setup
Reset button should not be used unless advised by an Xplornet
representative. This button is used to restore the factory default settings
when pressed for more than 5 seconds.
Turn the WLAN on or turn off
Power supply port is connected to the power adapter
X P L O R N E T H U B
Description
USB2.0 host port in right panel: Used for the
USB storage device, or printer
Power switch. Power on or power off the Hub
Description
U S E R G U I D E
5