Ports And Buttons - Xplornet Hub User Manual

Ports and Buttons

Power plug, on/off switch and cable attachment ports are located on the back
of the Xplornet Hub.
Buttons
ON/OFF
WPS
WLAN
Reset
Ports
Power
LAN1 - LAN4
Phone
WAN
USB1
USB2
Power button
Used to establish secure connection to a new device
This button is not used
Reset button, not to be used unless advised by Xplornet
representative. This button is used to restore the factory
default settings when pressed for more than 5 seconds in
power-ON state
Power jack, 12 volt DC
RJ-45 LAN network ports, connected to the local network
through the RJ-45 network cable
RJ-11 port, connected to the phone through the telephone
line
Uplink Ethernet interface
USB HOST port, not to be used unless advised by Xplornet
representative. This port is used for the USB storage device
connection
This port is not used
X P L O R N E T H U B
Description
Description
U S E R G U I D E
5