Camera Setup - Moultrie MCG-13200 Instructions Manual

Game spy 2 plus digital game camera

Table of Contents

CAMERA SETUP

Power ON

Slide the power switch to the ON position. The battery level will appear on the LCD Display

for 2 seconds.

After 2 seconds, the camera will display the countdown. When the countdown timer reaches

"00", the display will turn off and the camera will OK Capture Mode.

If the camera detects that the battery level is 15% or below, the Low Battery screen will

appear and the unit will turn off.

To begin modifying the camera settings, slide the switch to the SETUP position. The camera will display the currently set time. Use the UP and DOWN

arrow keys to change the currently flashing option. Once setting is adjusted to the desired option, press OK to lock in the setting and move to the

next field/option.

Note: while in SETUP mode, the motion sensor will detect movement and illuminate the STATUS LED on the front of the camera for ~1 second.

You can use this feature to ensure camera is properly aimed to detect movement in the desired target area.

MCG-13200_Game Spy 2 Plus (2017) manual_ENGLISH_2-3-17.indd 4

2/3/17 11:09 AM

Table of Contents

Show Quick Links

Table of Contents