User Options; System Setup - Moultrie DIGITAL GAME CAMERA Instruction Manual

Power Options
Clock Battery - This is a long life battery that
needs to be changed only when the clock fails to
keep proper time or user settings are lost. Replace
with CR2025 or equivalent.
Load battery and holder
in clock battery compartment
Holder
3V BATTERY
Load battery in holder

System Setup

You can use the Quick Start method to set the system using factory installed settings
(Defaults). The system is fully functional for most applications after the battery has been
installed, the time & date have been set, and the system has been turned ON, or you can
put in custom settings as follows:
SETTING
Time
Date
Event Counter
Image Capture Mode
Still Image Quality
Image Delay
Image Sequence
Erase images
Camera ID
Events - An event is when the infrared sensor detects movement. A picture is recorded
when the camera is activated by an event or manually in the Handheld mode. Each event
may cause still images or videos to be made. Note if you exceed the available memory
pictures will not be made, but events will be counted.
(continued)
+
Holder
User Setup Sequence
FACTORY SETTING (Default)
Set Locally
Set Locally
0
Still
Standard
1 Minute
1 picture per event
n/a
Blank

USER OPTIONS

n/a
n/a
Indicates number of times the IR sensor
was activated. May be reset as desired.
Still or Video
Standard or High
20 seconds to 60 minutes
1 - 2 - 3 - pictures per event
Yes - No
8 letters or numbers that will appear on
your pictures.
Page 4