CipherLab 8700 Series Reference Manual page 116

8700 Series Mobile Computer
KEYPAD SEEMS NOT WORKING
Perform the keyboard test. (See
If the problem persists, reload the battery pack and perform the test again.
VIBRATOR SEEMS NOT WORKING
Perform the vibrator test. (See
If the problem persists, reload the battery pack and perform the test again.
MOBILE COMPUTER SEEMS NOT WORKING
Upload all data to the host and perform the memory test. (See
If the problem persists, reload the battery pack and perform the test again.
CANNOT SCAN BARCODES
LOW BATTERY CONDITION
Check if the battery icon on the screen indicates a low battery status. If so, replace it
with a fresh battery.
If the probl em persists, c heck if th e batt ery contacts ge t dirty or the battery pack
does not fit to the compartment.
BARCODE OR RFID READER PROBLEM
Perform the reader test to see if the reader is working. (See
RFID.)
If the problem persists, reload the battery pack and perform the test again.
CANNOT DECODE DATA AFTER SCANNING
UNREADABLE BARCODE
Check if the barcode is defaced. A defaced barcode may not be readable.
UN-PROGRAMMED TO READ
Check if the scanner is program med to read t he s ymbology (type s of barcode) that
you are trying to read.
Try scanning a test barcode of the symbology you are trying to read.
DIRTY SCAN WINDOW
Check if the scan window gets dirty. Wipe it with a clean and dry cloth, and try again.
106
Reference Manual
3.3.4 Keyboard.)
3.3.7 Vibrator.)
3.3.5 Memory.)
3.3.1 Reader or 3.3.9