Auto Off; Power On (& Wakeup Event) Options; Key Click; System Password - CipherLab 8700 Series Reference Manual

3.2.3 AUTO OFF

Sets the mobile computer to automatically power off after idleness for a period of time.
Enter a value between 0 and 999 (minute).
Note: To disable this function, enter 0.
3.2.4 POWER ON (& WAKEUP EVENT) OPTIONS
This i s a su bmenu t hat confi gures how the mobile computer starts up a nd what event
wakes up the mobile computer:
Power On Options
Press the na vigation keys [Up] and [D
[Enter] to select it.
Resume: When the mobile computer is powered on, it resumes the last session of the program
that was run before it is turned off.
Restart: When the mobile computer is powered on, the system restarts over.
WakeUp Events
The events set can wake up the mobi le computer when i t takes place. Pres s the navi gation keys
[Up] and [Down] to move
wake-up of the mobile computer or not.
PwrKey: If set to yes, the mobile computer wakes up when the power key is pressed.
RS232: If se t to yes, the mobi le computer wakes up when
RS232 cable).
USB: If set to yes, the mobi le comput er wakes up when connected wi th to a USB port (by a
USB cable).
Charging: If set to yes, the mobile computer wakes up when getting charged via the cradle or
direct charging.
Charged: If set to yes, the mobile computer wakes up when charging completes.
Alarm: If set to yes, the mobi le computer wakes up when the al arm time is up. Alarm can be
set up through programming only.

3.2.5 KEY CLICK

Sets the audible signal the mobile computer produces when a key is pressed on the
keypad. Select a desired tone for the buzzer or mute it.

3.2.6 SYSTEM PASSWORD

Sets a password to control over user's access to the System Menu, Program Manager
and Kernel Menu. The password allows up to eight alphanumeric characters.
own] to sel ect betwee n "Resume" and "Restart ". Press
between the events, and press [Enter] to configure
Chapter 3 System Menu
it to enforce the
connected to a RS-232 por t (by
49