Workplace Inspection - Genie Z-45/25 Operator's Manual

Cribbing Instructions

Workplace Inspection

Observe and Obey:
Read, understand and obey the instructions and
hazards in the Workplace Inspection section of the
operator's manual on your machine.
Conduct a workplace inspection prior to
constructing and using cribbing to determine if the
site is suitable for safe machine operation.
The workplace must be inspected before each use
to determine if any changes have occurred that
could affect the safe operation of the machine.
4
Be aware of and avoid the following hazardous
situations when using cribbing:
• unstable surfaces that could shift under cribbing
• surfaces that cannot support the cribbing (refer
to the floor loading specifications in the
operator's manual)
• slippery surfaces that could cause cribbing to
slide or skid
• sloped surfaces of greater than 6°
• drop-offs or holes
• raised ground
First Edition • Fifth Printing
Part No. 82943