Replacement Of Batteries In Remote Control - Ouellet CCD12KCHVS-I Owner's Manual

REPLACING BATTERIES IN REMOTE CONTROL
1. Lightly press the " " and slide in the direction the arrow
is pointing to remove the back cover of the remote control
(as illustrated).
2. Remove the old batteries (as illustrated).
3. Insert two new " AAA " (1.5 V) dry batteries and make sure
the position of + and – is correct (as illustrated).
4. Put back the cover (as illustrated).
NOTES:
• When replacing batteries, use only new and identical ones
(same brand).
• When you do not use the remote control for a long time, take
out the batteries to avoid leakage in the remote control.
• If the remote control does not operate normally, please take
out the batteries and reinsert them after 30 seconds. If it is still
not working, replace the batteries.
• The batteries must be removed before disposal of the remote control.
14
2
1
3
4