Remove the expansion slot cover.
4.
CAUTION:
all PCI slots have either an expansion slot cover or an expansion board installed.
To replace the component, reverse the removal procedure.
Expansion board
CAUTION:
remove all AC power cords before removing or installing the expansion boards.
To remove the component:
Power down the server (on page 27).
1.
Do one of the following:
2.
Unlock and remove the bezel
o
Extend the server from the rack.
o
Remove the access panel
3.
Disconnect any internal or external cables from the expansion board.
4.
All manuals and user guides at all-guides.com
To prevent improper cooling and thermal damage, do not operate the server unless
To prevent damage to the server or expansion boards, power down the server and
("Front
bezel" on page 29).
("Access
panel" on page 30).
Removal and replacement procedures 44