System Board - HP PROLIANT ML350 G6 Maintenance And Service Manual

Close the heatsink locking levers.
6.
Install the large redundant fan air baffle, if removed.
7.
Install the access panel.
8.
Do one of the following:
9.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Power up the server.
10.

System board

To remove the component:
Power down the server (on page 27).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack.
o
Remove the access panel
3.
Disconnect all cables connected to the system board
4.
Remove all expansion boards
5.
Remove the large redundant fan air baffle, if installed
6.
Remove the DIMM baffles
7.
Remove all fans ("Fan" on page 34).
8.
Remove all DIMMs ("DIMM" on page 55).
9.
Remove the battery-backed write cache module, if installed
10.
page 46).
All manuals and user guides at all-guides.com
("Access panel" on page 30).
("Expansion board" on page 44).
("DIMM baffle" on page 33).
("Front bezel" on page 29).
("System board components" on page 82).
("Large redundant fan air
("Battery-backed write cache
Removal and replacement procedures 64
baffle" on page 32).
module" on