Summary of Contents for Whalen Belmont 2-in-1 Work Station
Page 1
LOT NUMBER: DATE PURCHASED: / Belmont 2-in-1 Work Station Model # JCS101104-C ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
Page 2
4. Plug the Cam Lock Cover into the cross slot of the Cam Locks to conceal the cam. You are now ready to assemble the KD unit. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 2 Factory No. 16015...
Page 3
T- Drawer Back Panel (1) U- Drawer Left Side (1) V- Drawer Right Side (1) W- Drawer Bottom Panel (1) CL- Left Slide Track (1) 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 3 Factory No. 16015...
Page 4
(19) Knob Bolt (2) Glue (1) 4 mm Allen Wrench (1) Touch-up Pen (1) Tools required: Allen Wrench (provided), Phillips screwdriver and Hammer (not provided). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 4 Factory No. 16015...
Page 5
4. Slide the Drawer Bottom Panel (W) all the way into the grooves with the finished surface up. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 5 Factory No. 16015...
Page 6
Tightly fasten with a Phillips screwdriver. 7. Repeat the last step to attach the Right Slide Runner (DR) to the Drawer Right Side Panel (V). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 6 Factory No. 16015...
Page 7
Side Moldings (G) on a level and protective surface with the holes facing up. Securely screw the Cam Bolts (3) into the designated small holes, as shown in the illustration. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 7 Factory No. 16015...
Page 8
13. Fasten two Hinge Supports (O) to the Cabinet Left Side Panel (F) using four 1-1/4” (10) into the Screws countersunk holes. Make sure that the pilot holes are close to the Left Side Molding (G). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 8 Factory No. 16015...
Page 9
16. Securely screw 5 Cam Bolts (3) into the designated small holes on the Left Side Panel (F), as shown in the illustration. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 9 Factory No. 16015...
Page 10
1-1/4” (10). Make sure that the front pilot hole on the Slide Support is close to the Wood Screws Cabinet Side Molding (G). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 10 Factory No. 16015...
Page 11
22. Securely screw 2 Cam Bolts (3) into the designated small holes on the back portion of the Desk Right Side Panel (B), as shown. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 11 Factory No. 16015...
Page 12
25. Align the Magnetic Catch (12) over the pilot holes on the Cabinet Crossbar (M) with the magnetic plate facing the edge with notches. And then fasten the Magnetic Catch (12) in place using two 5/8” Screw (11). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 12 Factory No. 16015...
Page 13
Dowels (4) and 2 Large Cam Locks (2). As shown below. 29. Repeat the same procedure to attach the Cabinet Right Side Panel assembly at the opposite end. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 13 Factory No. 16015...
Page 14
Nails (13) into the drilled small holes on the Back Panel (R). NOTE: We recommend attaching the back panel with the Ring Shank Nails at the corners first. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 14 Factory No. 16015...
Page 15
Cam Locks (2) face backward and the long edge with the cam bolt holes of the Modesty Panel (D) is up. 38. Align and attach the Desk Right Side Panel (B) to the Modesty Panel (D) by engaging two Large Cam Locks (2). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 15 Factory No. 16015...
Page 16
42. Fasten the Desk Top (A) to the Metal Brackets (16) on the Cabinet Right Side Panel (H) by using four 5/8” Bolts (5) and four Washers (6 and 7). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 16 Factory No. 16015...
Page 17
45. Open and close the Door Panel (Q) to make sure it is aligned and shuts correctly. If necessary, adjust the screws for a good fit. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 17 Factory No. 16015...
Page 18
Adjustable Shelf fit onto the Shelf Pins properly. 49. Plug the Cam Lock Covers (14) onto the visible Cams Locks to conceal the Cam Locks. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 18 Factory No. 16015...
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.