Advertisement
Quick Links
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP
POINTS, SHARP EDGES AS RECEIVED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Timbercrest File Cabinet
Model # 19WTFL-SPCA
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2019-12-10
1-866-942-5362
Rev. 0001-A
LOT NUMBER:
DATE PURCHASED: /
/
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Whalen 19WTFL-SPCA
Summary of Contents for Whalen 19WTFL-SPCA
- Page 1 LOT NUMBER: DATE PURCHASED: / Timbercrest File Cabinet Model # 19WTFL-SPCA ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
-
Page 2: Special Note
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Timbercrest File Cabinet MODEL #: 19WTFL-SPCA MADE IN CHINA MAXIMUM LOAD 50 lb. - Page 3 IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH.
- Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel (Qty. 1) B- Left Side Panel (Qty. 1) C- Right Side Panel (Qty. 1) D- Back Panel (Qty.
- Page 5 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. S- Caster Support (Qty. 1) (Qty. 2) (Qty. 4) Guide Rail Guide Block (Qty. 2) W- Locking Caster (Qty. 2) X- Swivel Caster (Qty.
- Page 6 Utility Drawer Assembling 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Securely screw the Small Cam Bolts (11) into the designated small holes on the Utility Drawer Front (H) using a Phillips screwdriver.
- Page 7 Utility Drawer Assembling 4. Attach and align the Drawer Side Panels (J and K) to the Drawer Front (H) by engaging 4 Small Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement). 5. Slide the Drawer Bottom Panel (L) all the way into the grooves.
- Page 8 Utility Drawer Assembling 6. Fasten the Drawer Back Panel (I) to the Drawer Side Panels (J and K) with four 35 mm Screws (6). Make sure that Drawer Bottom Panel (L) fits securely into the groove of the Drawer Back Panel (I). 7.
- Page 9 File Drawer Assembling 8. Securely screw the Small Cam Bolts (11) into the designated small holes on the File Drawer Front (M) using a Phillips screwdriver. 9. Glue the M6 x 30 mm Wood Dowels (4) into the inner holes of File Drawer Side Panels (O and P).
- Page 10 File Drawer Assembling 10. Using the pilot holes as a guide. Align and attach the Caster Support (S) to the bottom side of the Drawer Bottom Support (R) with two 35 mm Screws (6), as shown. 11. Fasten one Swivel Caster (X) onto the Caster Support (S) with four 15 mm Pan Head Screws (8), using the pilot holes as a guide.
- Page 11 File Drawer Assembling 12. Align and attach the Drawer Bottom Support (R) to the Drawer Front (M) by engaging 2 Small Cam Lock (1) as shown. 13. Attach and align the Drawer Side Panels (O and P) to the Drawer Front (M) by engaging 4 Small Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
- Page 12 File Drawer Assembling 14. Slide the Drawer Bottom Panel (Q) all the way into the grooves. 15. Fasten the Drawer Back Panel (N) to the Drawer Side Panels (O and P) and the Drawer Bottom Support (R) with six 35 mm Screws (6). Make sure that Drawer Bottom Panel (Q) fits securely into the groove of the Drawer Back Panel (N).
- Page 13 File Drawer Assembling 16. Turn the assembled drawer upright. Attach the Handle (10) to the pilot holes on the Drawer Front (M) with two 14 mm Flat Head Screws (7). 17. Position Guide Rails (T) onto the Drawer Side Panels (O and P) with the high side facing inward. 18.
- Page 14 Assembly Instructions 19. Securely screw the Large Cam Bolts (3) into the designated small holes on the Top Panel (A), Back Panel (D) and Side Panels (B and C) using a Phillips screwdriver. 20. Glue the M8 x 30 mm Wood Dowels (4) into the inner holes of Side Panels (B and C), Back Panel (D), and Stretchers (E, F and G).
- Page 15 Assembly Instructions 21. Align and attach the Bottom Back Stretcher (G) to the Back Panel (D) by engaging 2 Large Cam Locks (1). 22. Align and attach the Back Panel assembly to the Left Side Panel (B) by engaging 4 Large Cam Locks (1).
- Page 16 Assembly Instructions 23. Align and attach the Bottom Front Stretcher (F) to the Left Side Panel (B) by engaging 2 Cam Locks (1). 24. Align and attach the Middle Crossbar (E) to the Left Side Panel (B) by engaging 1 Cam Lock (1).
- Page 17 Assembly Instructions 25. Repeat the previous steps to attach the Right Side Panel (C) at the opposite end. 26. Attach the Top Panel (A) to the previous assembly by engaging 6 Large Cam Locks (2).
- Page 18 Assembly Instructions 27. Using the pilot holes as a guide, attach two Locking Casters (W) to the Bottom Front Stretcher (F) with four 15 mm Pan Head Screws (8) per caster. 28. Repeat last step to attach two Swivel Casters (X) to the Bottom Back Stretcher (G). 29.
- Page 19 Assembly Instructions 31. Insert the assembled drawers into frame. To insert the assembled drawers into your unit, extend the Ball Bearing Slide Tracks on the Side Panels (B and C) all the way forward (including ball bearing cart). Then, align the Slide Runners on the assembled drawers with the Slide Tracks and push the drawer carefully inside until it stops.
-
Page 20: Care And Maintenance
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
Need help?
Do you have a question about the 19WTFL-SPCA and is the answer not in the manual?
Questions and answers