How To Use - Panasonic CS-E9TKA Operating Instructions Manual

How to use

To optimise energy saving
ECONAVI
To select operation mode
MODE
AUTO - For your convenience
HEAT - To enjoy warm air
COOL - To enjoy cool air
DRY - To dehumidify the environment
To maximise comfort while
SLEEP
sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
• The indoor unit indicator will dim when this
operation is activated. This is not applicable
if the indicator brightness has been manually
dimmed.
• This operation is incorporated with the
activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9
hours).
• This operation can be set together with timer.
Sleep operation has the priority over OFF timer.
• This operation can be cancelled by pressing
the respective button when the sleep timer
reaches 0.0h.
To switch between
powerful & quiet
(Remote control display)
POWERFUL
QUIET
POWERFUL: To reach temperature quickly
POWERFUL
• This operation stops automatically after 15
minutes.
QUIET: To enjoy quiet operation
• This operation reduces airfl ow noise.
Auto OFF/ON button
AUTO
OFF/ON
6
(NORMAL)
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• To use in HEAT mode, press and hold the button until 1 beep is heard, then
release. And press again until 2 beeps, then release.
• Press the button again to turn off.
Human activity
sensor
Remote control
display
OFF/ON OFF/ON
MODE FAN SPEED
TEMP TEMP
SLEEP
AIR SWING
ON ON SET SET
TIMER TIMER
OFF OFF CANCEL CANCEL
AIR CONDITIONER AIR CONDITIONER
Sunlight sensor
and remote
control receiver
POWERFUL
Indicator
(Green)
POWER
(Orange)
TIMER
(Orange)
POWERFUL
(Blue)
nanoe-G
(Green)
ECONAVI
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press and hold for
approximately
5 seconds to show
12-hour (am/pm) or
24-hour time indication.
Press to restore the
remote control to
default setting.
Not used in normal
operations.