Set The Time; Confi Rm - Panasonic CS-E9TKA Operating Instructions Manual

Table of Contents

Advertisement

To purify the air
nanoe-G
• nanoe-G starts automatically when the unit is
OFF/ON
turned on with
.
• Can be activated even when the unit is turned
off. In this condition, the unit will operate as a fan
with AUTO fan speed and fl ap swing.
To deactivate viruses/bacteria on the fi lter
POWER
nanoe-G
• After the unit is turned off, the nanoe-G in-fi lter
deactivation may activate up to 150 minutes.
Turning on the unit cancels this operation.
To select fan speed
FAN SPEED
(Remote control display)
AUTO
FAN
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
To adjust airfl ow direction
AIR SWING
(Remote control display)
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the fl ap
swings left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal
fl ap is fi xed at the predetermined position.
The vertical fl ap swings left/right after the
temperature rises.
• Do not adjust the fl ap by hand.
Auto Restart Control
• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and airfl ow
direction.
• This control is not applicable when TIMER is set.
See "To learn more..." for details.
To set the timer
2 sets of ON and OFF timers are available
to turn ON or OFF the unit at different preset
times.
1
2
3
ON
SET
TIMER
OFF
CANCEL
CANCEL
1 Select ON or OFF
timer
• Each time pressed:
Cancel

2 Set the time

3 Confi rm
• To cancel ON or OFF timer, press
to select respective
OFF
.
CANCEL
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
or
ON
OFF
or
then press
SET
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to 15 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
Note
SLEEP
,
,
• Can be activated in all modes and can be
cancelled by pressing the respective button
again.
,
• Cannot be selected at the same time.
Example:
OFF at 22:00
OFF
SET
TIMER
or
ON
or
then press
to select respective
.
,
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents