Advanced Settings - 3D Systems Geomagic Capture Series User Manual

ADVANCED SETTINGS

Device Status
A
Manages device connection status. All listed devices can be connected or disconnected by selecting or clearing the check box
next to the name of each device.
Network Configuration
B
Configures network settings.
Note: To configure the network settings, you need to select the desired scanner first in the Device Status.
Auto Configure
- Automatically reconfigures the network for all checked scanners.
IP Address
– Used to manually set a static IP address.
Subnet Mask / Default Gateway
For more information on setting up your Geomagic Capture Series 3D scanner and scanner connections, see
Configuration.
Use DHCP – Uses the DHCP IP protocol instead of static IP addresses.
Apply – Applies all changes.
Update Device Firmwares
C
Updates device firmwares via file. For more information, see
3D Systems, Inc.
– Used to manually set a subnet mask and a default gateway.
Updating Device
22
Firmwares.
Network