Table of Contents
Advertisement
10.
In the Device Registration, change the method to the desired method. If you select the
alignment will be used to align for the next scans. For more information, see
11.
Go back to the Scan menu by clicking
12.
Reposition the part and click
Note: If a scan was made using the Best Fit alignment method, make sure at least 30% of the original scan area is in the
next scan. If the Target alignment method was used, make sure that at least three targets from the first scan area are
visible in the next scan.
13.
Continue scanning until the project is completed and click
3D Systems, Inc.
Back
.
Scan
to take another scan.
Menu
Overview.
Accept
(or OK) in your application.
13
Best Fit
method, for example, the Best Fit
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Geomagic Capture Series and is the answer not in the manual?