3D Systems Geomagic Capture Series User Manual page 20

Capturing Options
F
Options in this group allow users to manage their working environment and scan an object with optimal results.
There are six options:
Easy Scan
HDR
High Sensitivity
Reduce Noise
Last Scan
Delete Last Scan
Exposure Settings
G
Allows users to adjust an exposure value.
A scan that shows a lot of red is over-exposed, and a scan that shows a lot of blue and black is under-exposed. An optimal
scan has a good balance, and several "high spots" of exposure.
Under-Exposed
Note: Scan quality can vary by the following factors:
• Environmental conditions
Light and vibration can cause inaccuracies. Ensure the system is stable and the exposure is set to the condi-
tions.
• Stability of the scanner and the object
If either the scanner or the object move during the scan, the data will be inaccurate. Ensure both are stable and
secure.
Shape and size of the object
•
If the part you want to scan has limited features, you must use target markers or spheres to align the data.
Turntable Settings
H
Allows users to adjust the number of scan divisions in 360 rotational degrees.
Note: More scans will result in better coverage, but setting this value too high may result in a lot of excess data, which
will only serve to slow down scanning and post-processing operations. 6 to 12 scans are recommended. The number
of scans can be adjusted up to 16 scans.
Status Bar
I
Shows the current working status of the scanner.
Settings
J
Goes to the Settings menu.
Help
K
Shows the Help document.
3D Systems, Inc.
Automatically determines the best exposure settings, and then captures an object.
Note: HDR is used during the capturing process if necessary
Scans multiple times at varying levels of exposures in order to capture large contrast variances for
scanned objects.
Special capturing option which allows for capturing of difficult-to-capture noisy surfaces, such as
hair.
Minimizes waves or ripples that may be cause by tiny movements or ambient vibration during a
capture process.
Displays the last set of scans created.
Deletes the last scan data created.
Over-Exposed Optimal
18