Hellenbrand ProMate-6.0 Owner's Manual page 20

Optional Relay Kit
Item #7
ITEM NO.
ORDER NO.
1 103473
2 102096
3 101262
4 109807
5 101746
6 101459
7 Relay Kit Options:
103724
103723
103730
103729
102385
8
Not Shown 102653
After completing any valve maintenance involving the drive assembly or the drive cap assembly and pistons, press and
hold NEXT and REGEN buttons for 3 seconds or unplug power source jack from the printed circuit board (black wire)
and plug back in. This resets the electronics and establishes the service piston position. The display should flash all
wording, then flash the software version (ex: 214) and then reset the valve to the service position.
DRIVE CAP ASSEMBLY, DOWNFLOW PISTON, REGENERANT PISTON
ITEM NO.
ORDER NO.
1 102548
2 101613
3 102167
4 102292
5 102192
6 102165
7 101189
8 102892
*102292 is labeled with DN and 102297 is labeled with UP.
Note: The regenerant piston is not used in backwash only applications.
**Standard Option.
Do not use vaseline, oils, other hydrocarbon lubricants or spray silicone anywhere. A silicone lubricant may be used on black o-rings but is not necessary. Avoid
any type of lubricants, including silicone, on red or clear lip seals.
After completing any valve maintenance involving the drive assembly or the drive cap assembly and pistons, press and hold NEXT and REGEN buttons for 3 seconds
or unplug power source jack from the printed circuit board (black wire) and plug back in. This resets the electronics and establishes the service piston position.
The display should flash all wording, then flash the software version (ex: 214) and then reset the valve to the service position.
20
FRONT COVER AND DRIVE ASSEMBLY
8
DESCRIPTION
Cover Assy w/Label
Motor
Drive Bracket & Spring Clip
PC Board
Drive Gear 12x36
Drive Gear Cover
PCM Relay Installed
PCM Relay Kit
Pigtail Relay Installed
Pigtail Relay Kit
Relay Only
Transformer 110V-12V
AND SPACER STACK ASSEMBLY
DESCRIPTION
Spacer Stack Assy
Drive Cap Assy.
O-Ring 228 -Drive Cap Assy.
Piston Downflow Assy.
O-ring 337-tank
O-ring - Distributor Tube
Back Plate
Service Wrench - Not Shown
2
7
QTY.
1
1
1
1
3
1
1
1
1
QTY.
1
1
1
1**
1
1
1 1
1
4
3
Figure 14
7
6
Figure 15
5