Configure The Lcd Password; Configure Local User Access - Eaton ePDU G3 Operation Manual

10. Set the time of delivery using the drop-down list.
11. Click Test to send a test e-mail.
12. Otherwise, click Save or Cancel.

Configure the LCD Password

NOTE 1 Only an administrator can activate, deactivate, or modify the LCD password.
NOTE 2 There can only be one LCD password on the ePDU.
1. Access the Web interface and log in.
2. Under Settings, select Access Accounts. The Access Accounts page displays.
3. In the LCD Access panel, perform the following:
Activate the feature to change the password.
l
Type the LCD password.
l
Type the LCD password again.
l
4.Click Save.

Configure Local User Access

NOTE 1
Only an administrator can create or modify a user account.
NOTE 2 Local users can use this user name and password for authentication if the
authentication mode selected in the Network Security Global submenu is Local (see
"Set Authentication Mode" on page 122).
NOTE 3 The User name is used for authentication. It must be unique. If there is a name
conflict when you are creating a new account, a warning message displays.
1. Access the Web interface and log in.
2. Under Settings, select Access Accounts. The Access Accounts page displays.
3. In the Multi-User Access panel, select Add a local user from the Add drop down list. The Users Settings
dialog displays.
4. Perform the following:
Type the user's login user name to replace the default name.
l
Type the user's password (minimum of five characters).
l
Type the user's password again.
l
5. Choose one of the following profile characteristics:
Admin: This user has administrator privileges and controls the access of other users to the Web
l
interface. The Administrator can restart the communications module, but cannot perform a firmware
upgrade.
ePDU User: This user has access to the ePDU and either read only or restricted read-write privileges.
l
Outlet User: This user has access to the specified outlet or outlets. Select the outlet or outlets and the
l
user-defined groups this user can access.
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU
Web Interface Operation
111