Appendix A Reference - Quectel UC20 Application Note

7

Appendix A Reference

Table 1: Related Documents
SN Document Name
[1] Quectel_UC20_AT_Commands_Manual
Table 2: Terms and Abbreviations
Abbreviation
PPP
UART
APN
CHAP
DNS
DTR
RI
DCD
GPRS
GSM
IP
UC20_PPP_Application_Note
Description
Point-to-Point Protocol, The Point-to-Point Protocol is designed for simple
links which transport packets between two peers. These links provide
full-duplex simultaneous bi-directional operation, and are assumed to deliver
packets in order. It is intended that PPP provides a common solution for easy
connection of a wide variety of hosts, bridges and routers.
Universal Asynchronous Receiver Transmitter. Integrated circuit which works
with serial ports converting incoming serial data from a serial port into
parallel form and parallel data to serial form when sending out data through a
serial port (Computers, Electronics).
Access Point Name
Challenge Handshake Authentication Protocol
Domain Name Server
Data Terminal Ready
Ring Indicator
Data Carrier Detection
General Packet Radio Service
Global System of Mobile Communication
Internet Protocol
Confidential / Released
UMTS/HSPA Module Series
UC20 PPP Application Note
Remark
AT Commands Manual for UC20
28 / 29